D-Link Router

21D-Link DWR-961 User Manual
Section 3 - Conguration
The subsequent conguration pages will dier depending on the selection you
make on this page.
Internet Settings
PPPoE
(RFC-2516
PPP over
Ethernet):
Choose this option if your Internet connection requires a
username and password to connect. Most DSL modems use
this style of connection. See PPPoE (Username / Password) on
page 14 for information about how to congure this type of
connection.
Dynamic
IP Address
(IPoEoA/
MER(MAC
Encapsulated
Routed) with
DHCP):
Choose this if your ISP automatically provides you with an IP
address. Most cable modems use this type of connection. See
Dynamic IP (DHCP) on page 17 for information about how to
congure this type of connection.
Static IP
Address:
Choose this option if your Internet Service Provider (ISP)
provided you with IP address information that has to be
manually congured. See Static IP on page 18 for information
about how to congure this type of connection.
Bridge Mode
(RFC-1483
Bridged):
Choose this option to use the DWR-961 as a network bridge. For
details see Bridge Mode (RFC-1483 Bridged) on page 19.
After entering the requested information,click Next to continue.
Note: If you are not sure what connection type to use or what settings to enter, check
with your Internet Service Provider (ISP).