20D-Link DWR-961 User Manual
Section 3 - Conguration
Wizard
This wizard will guide you through a step-by-step process to congure your router
to connect to the Internet over Ethernet.
Click Next to continue.
Note: While using the wizard, you can click Back to go back to the previous step,
or you can click Cancel to close the wizard.
Select the Internet connection type you use. The connection types are explained on
the following page. If you are unsure which connection type you should use, contact
your Internet Service Provider (ISP).
Click Back to go back to the previous page or click Cancel to close the wizard.
Note: The DWR-961 has a Multi-WAN Failover feature that allows the router to
switch to a 3G/4G connection if the WAN connection is down or unavailable.
To congure this feature, please refer to Multi-WAN on page 33.