D-Link Router - SPI Settings

73D-Link DWR-961 User Manual
Section 3 - Conguration
Stateful Packet Inspection (SPI) checks trac against known protocols, and drops packets that do not conform to known patterns. SPI is also known
as dynamic packet inspection.
SPI Settings
SPI Enable: Check the Enable SPI box to enable the SPI (Stateful Packet
Inspection) feature.
Endpoint
Filter:
Select the appropriate endpoint lter setting.
Log Dropped
Packet
Enable:
Select Enable to log all dropped packets. The default setting is
Disable.
Click Apply to save your settings.