D-Link Router

60D-Link DWR-961 User Manual
Section 3 - Conguration
Port Trigger Cong
Port Trigger Cong
Port Trigger Check this box to enable the port trigger.
Rule Name: Specify the name of the rule for reference.
Use Interface: Specify which interface the rule is bound to.
Trigger Port: Specify the internal port that will initiate the port trigger.
Trigger
Protocol:
Specify the protocol that will initiate the port trigger.
Public Port: Specify the public port(s) that to which the trigger will forward.
Public
Protocol:
Select a public protocol
Time
Schedule:
Select the time schedule during which the port trigger rule is
active. To create a new time schedule, click New Time Schedule.
Click Apply to save your settings, Cancel to revert to your previous settings, or Back
to return to the previous screen.