D-Link Router

27D-Link DWR-961 User Manual
Section 3 - Conguration
If you previously selected Bridge Mode (RFC-1483 Bridged), click Next to continue.
Once your network connection has been congured, you will be directed to congure
your wireless connection.
Enter a Wireless Network Name (SSID), choose a wireless channel (optional), and a
wireless mode (optional), then click Next to continue.
MAC Address: The default MAC address is set to the WAN port’s physical
interface MAC address on the router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the Clone button to replace the WAN port’s MAC
address with the MAC address of your PC.
Wan Ping
Enable:
Check this box to have the router respond to WAN pings. This is
not recommended.