37D-Link DWR-961 User Manual
Section 3 - Conguration
Static IPv6
WAN IPv6 Address Settings
Enable: Check this box to enable WAN connection over IPv6
Connection
Name:
Enter a name for this connection
IPv6 Address: Enter the static IPv6 address of the router.
Subnet Prex
Length:
Enter the subnet prex length.
Default
Gateway:
Enter the LAN (local) IPv6 address for the router.
DNS
Addresses:
Enter the primary and secondary DNS server addresses.
DS-Lite: Dual Stack Lite (DS-Lite) is used by some ISPs to manage IPv4-
IPv6 transitions. Check this box if your connection uses DS-Lite.
AFTR IPv6
Address:
If DS-Lite is enabled, enter the AFTR IPv6 address provided by
your ISP.
Click Apply to save your settings, or Cancel to revert to your previous settings.