D-Link Router User Manual

39D-Link DWR-961 User Manual
Section 3 - Conguration
PPPoE
PPPoE
Enable: Check this box to enable WAN connection over IPv6 PPPoE.
Connection
Name:
Enter a name for this connection
Address
Mode:
Select Dynamic IP if your IPv6 address is assigned by your ISP.
Select Static IP to enter an IP address manually.
DHCP Mode: If you selected Dynamic IP, specify how your IPv6 WAN
connection will get an IP address. Choose from Auto, Stateless,
DHCPv6 Stateful, or DHCPv6 Stateless.
IP Address: If you selected Static IP, enter the IPv6 address here.
DNS Mode: Specify if DNS address are obtained automatically or enter them
manually. If you have selected Static IP, these elds are required.
DNS
Addresses:
If you selected manual DNS, enter the primary and secondary
DNS server addresses. If you have selected Static IP, these elds
are required.
DS-Lite: Dual Stack Lite (DS-Lite) is used by some ISPs to manage IPv4-
IPv6 transitions. Check this box if your connection uses DS-Lite.
AFTR IPv6
Address:
If DS-Lite is enabled, enter the AFTR IPv6 address provided by
your ISP.
Click Apply to save your settings, or Cancel to revert to your previous settings.

D-Link Router Specifications

General

Brand	D-Link
Model	Router
Category	Network Router
Language	English