85D-Link DWR-961 User Manual
Section 3 - Conguration
Query
Response
Interval:
The query response interval is the maximum amount of time in
seconds that the router waits to receive a response to a General
Query message. It is the Maximum Response Time eld in the
message header. The default query response interval is 10
seconds and must be less than the query interval.
Host Timeout: Hosts must reply to queries within this value in seconds or be
dropped from the group.
Leave
Timeout:
The amount of time the host waits to receive an new IGMP join
message after leaving the current group. If it does not receive a
join message in the specied time, it times out.
IGMP Max
Groups:
Specify the maximum number of groups a host can join.
For Snooping and Proxy:
LAN1-4, 2.4,
and 5 GHz
Wireless:
Select Enable to enable IGMP on this interface.
Click Apply to save your settings.