D-Link Router User Manual

87D-Link DWR-961 User Manual
Section 3 - Conguration
Last Member
Query
Interval:
The last member query interval is the amount of time in seconds
that the router waits to receive a response to a Group-Specic
Query message. The last member query interval is also the
amount of time in seconds between successive Group-Specic
Query messages.
Last Member
Query Count:
The last member query count is the number of messages the
router sends out during the Last Member Query Interval. If
no host responds to those messages, the MLD state is removed
from those hosts.
Query
Response
Interval:
The query response interval is the maximum amount of time in
seconds that the router waits to receive a response to a General
Query message. The query response interval is the Maximum
Response Time eld in the message header. The default query
response interval is 10 seconds and must be less than the query
interval.
If you have selected Snooping:
Fast Leave: Check the box to enable the fast leave feature.
Drop
Unknown
Stream:
Check this box to drop unknown streams.
Last Member
Query
Interval:
The last member query interval is the amount of time in
milliseconds that the router waits to receive a response to a
Group-Specic Query message. The last member query interval
is also the amount of time in seconds between successive
Group-Specic Query messages.

D-Link Router Specifications

General

Brand	D-Link
Model	Router
Category	Network Router
Language	English