D-Link xStack DES-3528 Series - Page 103

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
103
1 default 00-02-A5-FD-66-97 15 Dynamic
1 default 00-03-09-18-10-01 15 Dynamic
1 default 00-03-9D-73-32-F0 15 Dynamic
1 default 00-03-B3-00-09-E9 15 Dynamic
1 default 00-04-00-00-00-00 15 Dynamic
1 default 00-05-5D-04-D6-A4 15 Dynamic
1 default 00-05-5D-25-45-61 15 Dynamic
1 default 00-05-5D-6A-A5-2C 15 Dynamic
1 default 00-05-5D-9A-FE-6D 15 Dynamic
1 default 00-05-5D-DB-BA-7C 15 Dynamic
1 default 00-05-5D-ED-84-52 15 Dynamic
1 default 00-05-5D-ED-84-7B 15 Dynamic
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config multicast vlan_filtering_mode
Purpose
Used to configure the the multicast packet filtering mode for VLANs.
Syntax config multicast vlan_filtering_mode [vlanid <vidlist> | vlan <vlan_name 32> | all ]
[forward_all_groups | forward_unregistered_groups | filter_unregistered_groups]
Description
The command configures the multicast packet filtering mode for VLANs.
Parameters
vlanid_list − Specifies a range of VLANs to be configured.
The filtering mode can be any of the following:
forward_all_groups - All multicast groups will be forwarded based on VLAN.
forward_unregistered_groups - The registered group will be forwarded based on the register
table.The unregister group will be forwarded based on VLAN.
filter_unregistered_groups - The registered group will be forwarded based on the register
table.The unregister group will be filtered.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command
Example usage:
To configure the multicast packet filtering mode for vlans:
DES-3528:admin# config multicast vlan_filtering_mode vlan 200-300
forward_all_groups
Command: config multicast vlan_filtering_mode vlan 200-300 forward_all_groups
Success.
DES-3528:admin#
show multicast vlan_filtering_mode
Purpose
Used to show the multicast packet filtering mode for VLANs.
Syntax show multicast vlan_filtering_mode {[vlanid <vidlist> | vlan <vlan_name 32>]}
Description
The command displays the multicast packet filtering mode for VLAN.
Parameters
vlanid_list − Specifies a range of vlans to be configured.
If no parameter specified , the deivce will show all multicast filtering settings in the device.
Restrictions
None.
Example usage:
To display multicast VLAN filtering mode for VLANs:
DES-3528:admin# show multicast vlan_filtering_mode
Command: show multicast vlan_filtering_mode
VLAN ID/VLAN Name Multicase Filter Mode
----------------------- -----------------------------