D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
149
Asymmetric VLAN Commands
The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Used to enable the asymmetric VLAN function on the Switch.
Syntax enable asymmetric_vlan
Description
This command enables the asymmetric VLAN function on the Switch
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable asymmetric VLANs:
DES-3528:admin# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3528:admin#
disable asymmetric_vlan
Purpose
Used to disable the asymmetric VLAN function on the Switch.
Syntax disable asymmetric_vlan
Description
This command disables the asymmetric VLAN function on the Switch
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable asymmetric VLANs:
DES-3528:admin# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English