xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
13
Basic Switch Commands
The basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command Parameters
create account [admin | operator | power_user | user] <username 15> {encrypt [plain_text | sha_1]
<password>}
config account <username> {encrypt [plain_text | sha_1] <password>}
show account
delete account <username>
enable password
encryption
disable password
encryption
show session
show switch
show device_status
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes | 5_minutes |
10_minutes | 15_minutes]}(1)
enable clipaging
disable clipaging
telnet <ipaddr> {tcp_port <value 1-65535>}
enable telnet <tcp_port_number 1-65535>
disable telnet
enable web <tcp_port_number 1-65535>
disable web
save {[config <config_id 1-2> | log | all]}
reboot {force_agree}
reset {[config | system]} {force_agree}
login
logout
clear
config terminal width [default | <value 80-200>]
show terminal width
config temperature [trap | log] state [enable | disable]
config temperature
threshold
{high <temperature -500-500> | low <temperature -500-500>}
show environment
To Next Page
Loading...
Need help?
General