EasyManuals Logo

D-Link xStack DES-3528 Series Cli Reference Guide

D-Link xStack DES-3528 Series
605 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #512 background imageLoading...
Page #512 background image
xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
512
Compound Authentication Commands
The Compound Authentication commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
config authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add | delete] ports [<portlist> |
all]
config authentication mac_format {case [lowercase | uppercase] | delimiter {[hyphen | colon | dot | none]| number
[1 | 2 | 5]}}
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid <vidlist> state
[enable | disable]}] | multi_authen_methods [none | any | dot1x_impb |
impb_jwac | impb_wac | mac_impb]}(1)
show authentication guest_vlan
show authentication ports {<portlist>}
enable authorization attributes
disable authorization attributes
show authorization
config authentication server
failover
[local | permit | block]
show authentication
show authentication mac_format
Each command is listed, in detail, in the following sections.
create authentication guest_vlan
Purpose
This command allows the user to assign a static VLAN to be guest VLAN.
Syntax create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Description
The specific VLAN which assigned to guest VLAN must be existed.
The specific VLAN which assigned to guest VLAN can’t be deleted.
Parameters vlan - Specifies the guest VLAN by VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Specify the guest VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This ID must be between 1 and 4094.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To assign a static VLAN to be guest VLAN:
DES-3528:admin# create authentication guest_vlan vlan guestVLAN
Command: create authentication guest_vlan vlan guestVLAN
Success.
DES-3528:admin#

Table of Contents

Other manuals for D-Link xStack DES-3528 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DES-3528 Series and is the answer not in the manual?

D-Link xStack DES-3528 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DES-3528 Series
CategorySwitch
LanguageEnglish

Related product manuals