xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
115
To configure the traffic scheduling mechanism for each CoS queue:
DES-3528:admin# config scheduling_mechanism ports 1 strict
Command: config scheduling_mechanism ports 1 strict
Success.
show scheduling
Purpose
Used to display the current configured traffic scheduling for a port or a range of ports on the
Switch.
Syntax show scheduling {<portlist>}
Description
This command will display the current traffic scheduling settings for a port or a range of ports
on the Switch.
Parameters
<portlist> − Specifies a port or a range of ports to be displayed.
Restrictions
None.
Example usage:
To display the current scheduling configuration:
DES-3528:admin# show scheduling
Command: show scheduling
QoS Output Scheduling On Port: 1
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
QoS Output Scheduling On Port: 2
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show scheduling_mechanism
Purpose
Used to show the current traffic scheduling mechanism for a port or a range of ports on the
Switch.
Syntax
show
scheduling_mechanism {<portlist>}
Description
This command is used to display the current traffic scheduling mechanism for a port or a
range of ports on the Switch.
Parameters <portlist> – Specifies a range of ports to be displayed.
Restrictions
None.
Example usage:
To Next Page
Loading...
