D-Link xStack DES-3528 Series - Page 139

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
139
show private_vlan
Purpose
This command is used to display private VLAN information on the switch.
Syntax show private_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Description
This command is used to display private VLAN information on the switch.
Parameters <vlan_name 32> - (Optional) Specify the name of the private VLAN. The maximum length is
32 characters.
vlanid - (Optional) Specify the VLAN ID of the private VLAN.
<vidlist> - Specify the VLAN ID of the private VLAN.
Restrictions
Only Administrator, Operator users can issue this command.
Example usage:
To display private VLAN settings:
DES-3528:admin#show private_vlan
Command: show private_vlan
Primary VLAN 10
------------------------------------------
Promiscuous Ports : 1:5-1:10
Trunk Ports : 1:11-1:12
Community Ports : 1:13-1:14 Community VLAN : 2
Community Ports : 1:15-1:16 Community VLAN : 3
Community Ports : 1:17-1:18 Community VLAN : 4
Community Ports : 1:19-1:20 Community VLAN : 5
Total Entries: 1
DES-3528:admin#