D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
144
Command: show voice_vlan
Voice VLAN State : Enabled
VLAN ID : 1
VLAN Name : default
Priority : 6
Aging Time : 60 minutes
Log State : Enabled
Member Ports : 1-28
Dynamic Member Ports :
DES-3528:admin#
show voice_vlan oui
Purpose
Used to display OUI information of the voice VLAN.
Syntax show voice_vlan oui
Description
This command is used to display OUI information of the voice VLAN.
Parameters
None.
Restrictions
None.
Example usage:
To display the OUI information of voice VLAN:
DES-3528:admin# show voice_vlan oui
Command: show voice_vlan oui
OUI Address Mask Description
------------------ ----------------- --------------
00-01-E3-00-00-00 FF-FF-FF-00-00-00 Siemens
00-03-6B-00-00-00 FF-FF-FF-00-00-00 Cisco
00-09-6E-00-00-00 FF-FF-FF-00-00-00 Avaya
00-0F-E2-00-00-00 FF-FF-FF-00-00-00 Huawei&3COM
00-60-B9-00-00-00 FF-FF-FF-00-00-00 NEC&Philips
00-D0-1E-00-00-00 FF-FF-FF-00-00-00 Pingtel
00-E0-75-00-00-00 FF-FF-FF-00-00-00 Veritel
00-E0-BB-00-00-00 FF-FF-FF-00-00-00 3COM
Total Entries: 8
DES-3528:admin#
show voice_vlan ports
Purpose
Used to display the mode and status of voice VLAN ports.
Syntax show voice_vlan ports {<portlist>}
Description
This command is used to display the mode and status of voice VLAN ports.
Parameters <portlist> - A range of port to be displayed. If not specified, all ports’ information will be
displayed.
Restrictions
None.
Example usage:
To display the voice VLAN information of ports 1-5:
DES-3528:admin#show voice_vlan ports 1-5
Command: show voice_vlan ports 1-5
Ports Status Mode

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English