EasyManua.ls Logo

D-Link xStack DES-3528 Series

D-Link xStack DES-3528 Series
605 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
159
create address_binding ip_mac ipv6address
Purpose
Used to create an IPMACPort Binding entry in the white list.
Syntax create address_binding ip_mac ipv6address <ipv6addr> mac_address <macaddr>
{ports [<portlist> | all]}
Description
This command is used to create an IPMACPort Binding entry.
Parameters <ipv6addr> The IPv6 address of the device where the IPMACPort Binding is made.
<macaddr>The MAC address of the device where the IPMACPort binding is made.
<portlist>Specifies a port or range of ports to be configured for address binding.
all Specifies that all ports on the Switch will be configured for address binding.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To create a static IPv6 IMPB entry:
DES-3528:admin# create address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Command: create address_binding ip_mac ipv6address fe80::240:5ff:fe00:28 mac_address
00-00-00-00-00-11
Success.
DES-3528:admin#
config address_binding ip_mac ipv6address
Purpose
Used to configure an IPMACPort Binding entry.
Syntax config address_binding ip_mac ipv6address <ipv6addr> mac_address <macaddr>
{ports [<portlist> | all]}
Description
This command is used to configure an IPMACPort Binding entry.
Parameters <ipv6addr> The IP address of the device where the IPMACPort binding is made.
<macaddr> The MAC address of the device where the IPMACPort binding is made.
<portlist> Specifies a port or range of ports to be configured for address binding, if no
port is specified it will apply to all ports.
all Specifies that all ports on the Switch will be configured for address binding.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To configure a static IPv6 IMPB entry:
DES-3528:admin# config address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipv6address fe80::240:5ff:fe00:28 mac_address
00-00-00-00-00-11
Success.
DES-3528:admin#

Table of Contents

Other manuals for D-Link xStack DES-3528 Series

Related product manuals