D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
165
show address_binding nd_snoop binding_entry
Purpose
This command is used to display the IP–MAC–Port Binding ND snoop binding entry.
Syntax show address_binding nd_snoop binding_entry {port <port>}
Description
This command is used to display the IP–MAC–Port Binding ND snoop binding entry.
Parameters ports – Specifies the port used for this display.
Restrictions
None.
Example usage:
To display the IP–MAC–Port Binding ND snoop binding entry:
DES-3528:admin#show address_binding nd_snoop binding_entry
Command: show address_binding nd_snoop binding_entry
LT(Lease Time) ST(Status) - A:Active I:Inactive
IP Address MAC Address LT(sec) Port ST
--------------------------------------- ----------------- ---------- ----- --
Total Entries : 0
DES-3528:admin#
delete address_binding blocked
Purpose
This command is used to delete IP–MAC–Port Binding blocked entries.
Syntax delete address_binding blocked [all | vlan_name <vlan_name> mac_address
<macaddr>]
Description
This command is used to delete IP–MAC–Port Binding blocked entries.
Parameters all – Specifies that all the entries will be removed.
vlan_name - Specifies the name of the VLAN to which the blocked MAC address
belongs.
mac_address - Specifies the MAC address of the entry or the blocked MAC address.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To delete IP–MAC–Port Binding blocked entries:
DES-3528:admin#delete address_binding blocked all
Command: delete address_binding blocked all
Success.
DES-3528:admin#