D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
169
enable address_binding nd_snoop
Purpose
This command is used to enable ND snooping on the Switch.
Syntax enable address_binding nd_snoop
Description
This command is used to enable ND snooping on the Switch.
Parameters
None.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To enable the ND snooping function on the Switch:
DES-3528:admin# enable address_binding nd_snoop
Command: enable address_binding nd_snoop
Success.
DES-3528:admin#
disable address_binding nd_snoop
Purpose
This command is used to disable ND snooping on the Switch.
Syntax disable address_binding nd_snoop
Description
This command is used to disable ND snooping on the Switch.
Parameters
None.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To disable the ND snooping function on the Switch:
DES-3528:admin# disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
DES-3528:admin#
clear address_binding dhcp_snoop binding_entry ports
Purpose
Used to clear DHCP snooping entries on specified ports.
Syntax clear address_binding dhcp_snoop binding_entry ports [<portlist> | all] {[ipv6 |
all]}
Description
This command is used to clear the DHCP snooping entries learned for the specified
ports.
Parameters ports – Specifies the list of ports on which to clear the DHCP snooping entries.
all – Specifies that all the ports will be used for this configuration.
ipv6 – Specifies the IPv6 address used.
all – Specifies that all the addresses will be used for this configuration.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To clear address binding DHCP snooping entries:
DES-3528:admin# clear address_binding dhcp_snoop binding_entry ports 1-3
Command: clear address_binding dhcp_snoop binding_entry ports 1-3