xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
193
To create an MLD multicast VLAN group profile "g1":
config mld_snooping multicast_vlan_group_profile
Purpose
Used to configure an MLD multicast VLAN group profile on the Switch, to add or delete
multicast address for the profile.
Syntax config mld_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcastv6_address_list>
Description
This command configures an MLD multicast VLAN group profile on the Switch, and can add
or delete multicast addresses for the profile.
Parameters
<profile_name 32> − Specifies the MLD multicast VLAN group profile name, max length is
32.
[add | delete] – Add or delete MLD multicast address list to or from this multicast VLAN group
profile
<mcastv6_address_list> – Specifies the MLD multicast addresses to be configured. It can be
a continuous single multicast addresses, such as FF12::1, FF12::3, FF12::8, or a multicast
address range, such as FF12::1- FF12::12, or both of them, such as FF12::1, FF12::18-
FF12::20.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To add 225.1.1.1 to 226.1.1.1 to MLD multicast VLAN group profile "g1":
delete mld_snooping multicast_vlan_group_profile
Purpose
Used to delete an MLD multicast VLAN group profile on the Switch.
Syntax delete mld_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32>
| all]
Description
This command deletes an MLD multicast VLAN group profile on the Switch.
Parameters
<profile_name 32> − Specifies the MLD multicast VLAN profile name, max length is 32.
all – All MLD multicast VLAN group profile will be deleted.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete the MLD multicast VLAN group profile "g1":
To Next Page
Loading...
Need help?
General