D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
208
show igmp_snooping
Purpose
This command will display the current IGMP snooping configuration on the Switch.
Syntax show igmp_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Description
This command will display the current IGMP snooping configuration on the Switch.
Parameters vlan - (Optional) Specify the name of the VLAN for which you want to view the IGMP
snooping configuration.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the IGMP snooping
configuration.
<vlanid_list> - Enter the VLAN ID list here.
If the VLAN is not specified, the system will display all current IGMP snooping configurations.
Restrictions
None.
Example usage:
To show IGMP snooping:
DES-3528:admin# show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disable
Fast Leave : Disable
Report Suppression : Enable
Rate Limit : No Limitation
Version : 3
Data Driven Learning State : Enable
Data Driven Learning Aged Out : Disable
Data Driven Group Expiry Time : 260
Total Entries: 1
DES-3528:admin#
show igmp_snooping rate_limit
Purpose
This command displays the IGMP snooping rate limit setting.
Syntax show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Description
This command displays the IGMP snooping rate limit setting.
Parameters ports - Specify the port range.
<portlist> - Enter the range of ports here.
vlanid - Specify the VLAN range..
<vlanid_list> - Enter the VLAN ID list here.
Restrictions
None.
Example usage: