xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
213
show igmp_snooping statistics counter
Purpose
This command displays the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
Syntax show igmp_snooping statistic counter [vlan <vlan_name> | vlanid <vlanid_list> | ports
<portlist>]
Description
This command displays the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
Parameters vlan - Specify a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list here.
ports - Specify a list of ports to be displayed.
<portlist> - Enter the list of port to be displayed here.
Restrictions
None.
Example usage:
To display the IGMP snooping statistics counter:
Command: show igmp_snooping statistics counter vlanid 1
VLAN Name : default
-----------------------------------------------
Group Number : 10
Receive Statistics
Query
IGMP v1 Query : 1
IGMP v2 Query : 1
IGMP v3 Query : 1
Total : 3
Dropped By Rate Limitation : 1
Dropped By Multicast VLAN : 1
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 10
IGMP v3 Report : 10
IGMP v2 Leave : 1
Total : 21
Dropped By Rate Limitation : 0
Dropped By Max Group Limitation : 90
Dropped By Group Filter : 0
Dropped By Multicast VLAN : 1
Transmit Statistics
Query
IGMP v1 Query : 1
IGMP v2 Query : 1
IGMP v3 Query : 1
Total : 3
Report & Leave
IGMP v1 Report : 0
IGMP v2 Report : 10
IGMP v3 Report : 10
IGMP v2 Leave : 1
Total : 21
Total Entries : 1
To Next Page
Loading...
