xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
238
config dhcp_relay option_60 delete
Purpose
This command is used to delete dhcp_relay option_60 entry.
Syntax config dhcp_relay option_60 delete [string <mutiword 255> {relay <ipaddr>} |
ipaddress <ipaddr> | all | default {<ipaddr>}]
Description
This command can delete the entry specifed by user. When all is specified, all rules
excluding the default rules are deleted
Parameters string – Deletes all the entries whose string is equal to the string specified if the IP address is
not specified.
relay <ipaddr> - Deletes one entry, whose string and IP address are equal to the string and
IP address specified by the user.
ipaddress – Deletes any entry whose IP address is equal to the specified IP address.
default – Deletes any defaut relay IP address if ipaddress is not specified.
Default<ipaddr> – Deletes all default relay ipaddress if IP address is not specified.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete the DHCP relay option 60:
show dhcp_relay option_60
Purpose
This command is used to show dhcp_relay option_60 entry.
Syntax show dhcp_relay option_60 {[string <mutiword 255> | ipaddress <ipaddr> | default]}
Description
This command will display the dhcp_relay option_60 entry by the user specified.
Parameters ipaddress – Shows the entry whose ipaddress is equal to the specified ipaddress.
default – Shows the default behaviour of dhcp_relay option60.
string – Shows the entry whose string is equal to the string of a specified user.
Restrictions
None.
Example usage:
To display the DHCP relay option 60:
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
Matching Rules:
String Match Type IP Address
------ ----------- ---------
abc Exact Match 10.90.90.1
Total Entries : 1
To Next Page
Loading...
Need help?
General