D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
241
Matching Rules:
Client-ID Type Relay Rule
----------- ---- ---------
00-01-22-33-44-55 MAC Address Drop
Total Entries : 1
DES-3528:admin#
config dhcp_local_relay vlan
Purpose
Used to enable or disable DHCP local relay function to the vlan.
Syntax config dhcp_local_relay vlan <vlan_name 32> state [enable | disable]
Description
This command is used to enable or disable the DHCP local relay function for a specified
vlan. DHCP option 82 will also be automatically added.
Parameters <vlan_name 32> – The name of the VLAN to be enabled by DHCP local relay.
State – Enable or disable the DHCP local relay for a specified VLAN.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable DHCP local relay for the default VLAN:
DES-3528:admin# config dhcp_local_relay vlan default state enable
Command: config dhcp_local_relay vlan default state enable
Success.
DES-3528:admin#
enable dhcp_local_relay
Purpose
Used to enable the DHCP local relay function on the Switch.
Syntax enable dhcp_local_relay
Description
This command is used to enable the DHCP local relay function on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable the DHCP local relay function:
DES-3528:admin# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DES-3528:admin#