D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
245
Command Parameters
show auth_session_statistics {ports <portlist>}
show auth_client
show acct_client
config accounting service [network | shell | system] state [enable | disable]
show accounting service
Each command is listed, in detail, in the following sections:
enable 802.1x
Purpose
Used to enable the 802.1X server on the Switch.
Syntax enable 802.1x
Description
This command enables the 802.1X Network Access control server application on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable 802.1X on the Switch globally:
DES-3528:admin# enable 802.1x
Command: enable 802.1x
Success.
DES-3528:admin#
disable 802.1x
Purpose
Used to disable the 802.1X server on the Switch.
Syntax disable 802.1x
Description
This command is used to disable the 802.1X Network Access control server application on
the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable 802.1X on the Switch:
DES-3528:admin# disable 802.1x
Command: disable 802.1x
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English