delete access_profile
Purpose
Used to delete a previously created access profile.
Syntax delete access_profile [profile_id <value 1-14> | profile_name <name 1-32> | all]
Description
This command is used to delete a previously created access profile on the Switch.
Parameters
profile_id <value 1-14> − Enter an integer between 1 and 14 that is used to identify the
access profile that will be deleted with this command. This value is assigned to the access
profile when it is created with the create access_profile command. The user may enter a
profile ID number between 1 and 14, yet, remember only 14 access profiles can be created
on the Switch.
profile_name – Specifies the name of the profile. The maximum length is 32 characters.
all − Entering this parameter will delete all access profiles currently configured on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
To Next Page
Loading...
Need help?
General