D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
304
delete sflow flow_sampler ports
Purpose
Used to delete the sflow flow_sampler.
Syntax delete sflow flow_sampler ports [<portlist> | all]
Description
This command is used to delete the sflow flow_sampler that has been configured for the
specified port.
Parameters ports – Specifies the list of ports to be configured.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete all the sflow flow_sampler:
DES-3528:admin# delete sflow flow_sampler ports all
Command: delete sflow flow_sampler ports all
Success.
DES-3528:admin#
show sflow flow_sampler
Purpose
Used to show the sflow flow_sampler information of ports which have been created.
Syntax show sflow flow_sampler
Description
This command is used to show the sFlow flow_sampler which has been configured for ports.
The actual value rate is 256 times the displayed rate value. There are two types of rates.
Configure rate is configed by the user. In order to limit the number of packets sent to the
CPU when the rate of traffic to the CPU is high, the sampling rate will be decreased. This is
specified as the active rate.
Parameters None.
Restrictions
None.
Example usage:
To show the sflow flow_sampler:
DES-3528:admin# show sflow flow_sampler
Command: show sflow flow_sampler
Port Analyzer Server ID Configured Rate Active Rate Max Header Size
---- ------------------ --------------- ----------- ---------------
1 1 20 80 140
2 2 10 40 100
Total Entries: 2
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English