D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
321
Command: config gratuitous_arp send periodically ipif System interval 5
Success.
DES-3528:admin#
show gratuitous arp
Purpose
Used to display gratuitous ARP configuration.
Syntax show gratuitous_arp {ipif <ipif_name>}
Description
This command is used to display gratuitous ARP configuration.
Parameters
<ipif_name 12> − The interface name of the Layer 3 device.
Restrictions
None.
Example usage:
To display gratuitous ARP log and trap state:
DES-3528:admin# show gratuitous_arp
Command: show gratuitous_arp
Send on IPIF Status Up : Disabled
Send on Duplicate_IP_Detected : Disabled
Gratuitous ARP Learning : Disabled
IP Interface Name : System
Gratuitous ARP Trap : Disabled
Gratuitous ARP Log : Disabled
Gratuitous ARP Periodical Send Interval : 0
Total Entries: 1
DES-3528:admin#