D-Link xStack DES-3528 Series - Page 326

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
326
Command: show mac_notification
Global MAC Notification Settings
State : Enabled
Interval : 1
History Size : 1
DES-3528:admin#
show mac_notification ports
Purpose
Used to display the Switch’s MAC address table notification status settings.
Syntax
show mac_notification ports {<portlist>}
Description
This command is used to display the Switch’s MAC address table notification status settings.
Parameters
<portlist> − Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC notification table for all
ports.
Restrictions
None.
Example usage:
To display the MAC address table notification status settings for ports 1-7:
DES-3528:admin# show mac_notification ports 1-7
Command: show mac_notification ports 1-7
Port # MAC Address Table Notification State
------ ------------------------------------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh