D-Link xStack DES-3528 Series - Page 342

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
342
DES-3528:admin#
create authen server_group
Purpose
Used to create a user-defined authentication server group.
Syntax create authen server_group <string 15>
Description
This command will create an authentication server group. A server group is a technique used
to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user defined categories
for authentication using method lists. The user may add up to eight authentication server
hosts to this group using the config authen server_group command.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the newly created
server group.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To create the server group “group_1”:
DES-3528:admin# create authen server_group group_1
Command: create authen server_group group_1
Success.
DES-3528:admin#