D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
353
config ssh algorithm
Purpose
Used to configure the SSH algorithm.
Syntax config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |
twofish128 | twofish192 | twofish256 | MD5 | SHA1 | RSA | DSA] [enable | disable]
Description
This command allows users to configure the desired type of SSH algorithm used for
authentication encryption.
Parameters 3DES – This parameter will enable or disable the Triple_Data Encryption Standard
encryption algorithm.
AES128 − This parameter will enable or disable the Advanced Encryption Standard AES128
encryption algorithm.
AES192 − This parameter will enable or disable the Advanced Encryption Standard AES192
encryption algorithm.
AES256 − This parameter will enable or disable the Advanced Encryption Standard AES256
encryption algorithm.
arcfour − This parameter will enable or disable the Arcfour encryption algorithm.
blowfish − This parameter will enable or disable the Blowfish encryption algorithm.
cast128 − This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 − This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 − This parameter will enable or disable the twofish192 encryption algorithm.
MD5 − This parameter will enable or disable the MD5 Message Digest encryption algorithm.
SHA1 − This parameter will enable or disable the Secure Hash Algorithm encryption.
RSA − This parameter will enable or disable the RSA encryption algorithm.
DSA − This parameter will enable or disable the Digital Signature Algorithm encryption.
[enable | disable] – This allows the user to enable or disable algorithms entered in this
command, on the Switch.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Usage example:
To configure SSH algorithm:
DES-3528:admin# config ssh algorithm blowfish enable
Command: config ssh algorithm blowfish enable
Success.
DES-3528:admin#
show ssh algorithm
Purpose
Used to display the SSH algorithm setting.
Syntax show ssh algorithm
Description
This command will display the current SSH algorithm setting status.
Parameters
None.
Restrictions
None.
Usage Example:
To display SSH algorithms currently set on the Switch:
DES-3528:admin# show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
--------------------------
3DES : Enabled
AES128 : Enabled