xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
367
To update the name of a group:
download sim_ms
Purpose
Used to download firmware or configuration file to an indicated device.
Syntax
download sim_ms [firmware_from_tftp | configuration_from_tftp] <ipaddr> <path_filename> {[
members <mslist 1-32> | all]}
Description
This command will download a firmware file or configuration file to a specified device from a
TFTP server.
Parameters firmware_from_tftp – Specify this parameter to download firmware to members of a SIM
group.
configuration_from_tftp − Specify this parameter to download a Switch configuration to
members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or Switch on the TFTP
server.
members – Enter this parameter to specify the members to which the user prefers to
download firmware or Switch configuration files. The user may specify a member or members
by adding one of the following:
<mslist> − Enter a value, or values to specify which members of the SIM group will
receive the firmware or Switch configuration.
all – Add this parameter to specify all members of the SIM group will receive the
firmware or Switch configuration.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To download firmware:
Command: download sim_ms firmware_from_tftp 10.53.13.94 des3528.had
This device is updating firmware. Please wait several minutes ...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-00-35-28-01-00 Success
Command: download sim_ms configuration_from_tftp 10.53.13.94 des3528.txt
This device is updating configuration. Please wait several minutes ...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-00-35-28-01-00 Success