D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
370
Command Parameters
show jwac authenticate_page
config jwac authentication_page
element
[japanese | english] [default | page_title <desc 128> | login_window_title
<desc 32> | user_name_title <desc 16> | password_title <desc 16> |
logout_window_title <desc 32> | notification_line <value 1-5> <desc 128>]
Each command is listed, in detail, in the following sections.
enable jwac
Purpose
Used to enable JWAC function.
Syntax enable jwac
Description
This command is used to enable JWAC function. JWAC and WAC are mutual exclusive
functions. They cannot be enabled at the same time. Using the JWAC function, PC users
need to pass two stages of authentication. The first stage is to do the authentication with the
Quarantine Server and the second stage is the authentication with the Switch. For the
second stage, the authentication is similar to WAC, except that there is no port VLAN
membership change by JWAC after a host passes authentication. The RADIUS server will
share the server configuration defined by the 802.1X command set.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable JWAC:
DES-3528:admin# enable jwac
Command: enable jwac
Success.
DES-3528:admin#
disable jwac
Purpose
Used to disable JWAC function.
Syntax disable jwac
Description
This command is used to disable JWAC function.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable JWAC:
DES-3528:admin# disable jwac
Command: disable jwac
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English