D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
399
show lldp statistics
Purpose
Used to display the system LLDP statistics information.
Syntax show lldp statistics
Description
This command displays an overview of neighbor detection activity on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display global statistics information:
DES-3528:admin# show lldp statistics
Command: show lldp statistics
Last Change Time : 1705
Number of Table Insert : 0
Number of Table Delete : 0
Number of Table Drop : 0
Number of Table Ageout : 0
DES-3528:admin#
show lldp statistics ports
Purpose
Used to display the ports LLDP statistics information.
Syntax show lldp statistics ports{<portlist>}
Description
This command displays per-port LLDP statistics.
Parameters <portlist> – Use this parameter to define ports to be configured. When portlist is not
specified, information for all ports will be displayed.
Restrictions
None.
Usage Example:
To display statistics information of port 1:
DES-3528:admin# show lldp statistics ports 1
Command: show lldp statistics ports 1
Port ID : 1
------------------------------------------------------
LLDPStatsTxPortFramesTotal : 0
LLDPStatsRxPortFramesDiscardedTotal : 0
LLDPStatsRxPortFramesErrors : 0
LLDPStatsRxPortFramesTotal : 0
LLDPStatsRxPortTLVsDiscardedTotal : 0
LLDPStatsRxPortTLVsUnrecognizedTotal : 0
LLDPStatsRxPortAgeoutsTotal : 0
DES-3528:admin#