xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
416
DES-3528:admin# delete mac_based_vlan mac_address 00-00-00-00-00-01 vlan default
Command: delete mac_based_vlan mac mac_address 00-00-00-00-00-01 vlan default
Success.
show mac_based_vlan
Purpose
Used to show the static or dynamic MAC-based VLAN entry.
Syntax show mac_based_vlan {mac_address <macaddr> | [vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Description
This command is used to display the static or dynamic MAC-Based VLAN entry. If the MAC
address and VLAN is not specified, all static and dynamic entries will be displayed.
Parameters
mac − The MAC address.
vlan − The VLAN to be associated with the MAC address.
vlanid - Specifies the VLAN by VLAN ID.
Restrictions
None.
Example usage
To display the static or dynamic MAC-based VLAN entry:
DES-3528:admin# show mac_based_vlan
Command: show mac_based_vlan
MAC Address VLAN Status Type
------------- ----------- ------------- ------------
00-80-e0-14-a7-57 200 Active Static
00-80-c2-33-c3-45 200 Inactive Static
00-80-c2-33-c3-45 300 Active Mac_based Access Control
00-80-c2-33-c3-90 400 Active 802.1x
00-a2-44-17-32-98 500 Active JWAC
Total Entries : 5
To Next Page
Loading...
Need help?
General