D-Link xStack DES-3528 Series - Page 452

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
452
DES-3528:admin#
disable dnsr
Purpose
Used to disable DNS relay function.
Syntax disable dnsr {[cache | static]}
Description
This command is used to disable DNS relay function.
Parameters cache - The buffer cache which records the name of the server and IP address of the
corresponding.
static - The DNS Static Table in DNS server with the name of the server and IP address of
the corresponding.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable the DNS relay:
DES-3528:admin# disable dnsr cache
Command: disable dnsr cache
Success.
DES-3528:admin#
show dnsr
Purpose
Used to display the current DNS relay static table.
Syntax show dnsr {static}
Description
This command is used to display the current DNS relay static table.
Parameters {static} - The DNS Static Table in DNS server with the name of the server and IP address.
Restrictions
None
Example usage:
To display the DNS relay:
DES-3528:admin#show dnsr
Command: show dnsr
DNSR Status : Enabled
Primary Name Server : 0.0.0.0
Secondary Name Server : 0.0.0.0
DNSR Cache Status : Disabled
DNSR Static Table Status : Disabled
DNS Relay Static Table
Domain Name IP Address
-------------------------------------- ---------------
Total Entries: 0
DES-3528:admin#