D-Link xStack DES-3528 Series - Page 486

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
486
Command Parameters
config cfm mp_ltr_all [enable | disable]
show cfm mp_ltr_all
cfm lock md <string 22> ma <string 22> mepid <int 1-8191> remote_mepid <int 1-8191> action [start |
stop]
config cfm ais md <string 22> ma <string 22> mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> |
state [enable | disable]}
config cfm lock md <string 22> ma <string 22> mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> |
state [enable | disable]}
Each command is listed, in detail, in the following sections.
create cfm md
Purpose
Used to create a maintenance domain.
Syntax create cfm md <string 22> level <int 0-7>
Description
Different maintenance domains should have different names.
Parameters md – Specifies the maintenance domain name.
level – Specifies the maintenance domain level.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To create a cfm maintenance domain.
DES-3528:admin# create cfm md op_domain level 2
Command: create cfm md op_domain level 2
Success.
DES-3528:admin#