D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
548
DES-3528:admin# config ipv6 nd ns ipif System retrans_time 1000000
Command: config ipv6 nd ns ipif System retrans_time 1000000
Success.
DES-3528:admin#
show ipv6 nd
Purpose
Used to display information regarding neighbor detection on the Switch.
Syntax show ipv6 nd {ipif <ipif_name 12>}
Description
Used to display information regarding neighbor detection on the Switch.
Parameters ipif – (Optional) The name of the interface.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
If no IP interface is specified, it will show the IPv6 ND related configuration of all interfaces.
Restrictions
None.
Example usage:
To show IPv6 ND related configuration:
DES-3528:admin#show ipv6 nd ipif System
Command: show ipv6 nd ipif System
Interface Name : System
NS Retransmit Time : 0 (ms)
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English