xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
564
upload tech_support_toTFTP
Purpose
The upload tech_support_toTFTP command is used to upload the information of technique’s
support to TFTP server.
Syntax upload tech_support_toTFTP <ipaddr> <path_filename 64>
Description
The information is project dependent and includes the following information.
• Basic System information
• System log
• Running configuration
• Layer 1 information
• Layer 2 information
• Layer 3 information
• Application
• OS status
• Controller’s status
This command can be interrupted by Ctrl - C or ESC when it is executing.
Parameters <ipaddr> - Specifies the IP address of TFTP server.
<path_filename 64> - Specifies the file name to store the information of technique’s support
in TFTP server. The max size of the file name is 64.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To upload the information of technique’s support:
Command: upload tech_support_to_TFTP 10.0.0.66 tech_report.txt
Connecting to server................... Done.
Upload techsupport file................ Done.
Success.
To Next Page
Loading...
Need help?
General