D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
8
clear igmp_snooping data_driven_group
clear igmp_snooping statistics counter
clear jwac auth_state
clear log
clear mac_based_access_control auth_state
clear mld_snooping data_driven_group
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
When users enter a command without its required parameters, the CLI will prompt users with a Next possible
completions: message.
DES-3528:admin# config account
Command: config account
Next possible completions:
<username>
DES-3528:admin#
In this case, the command config account was entered with the parameter <username>. The CLI will then prompt
users to enter the <username> with the message, Next possible completions:. Every command in the CLI has this
feature, and complex commands have several layers of parameter prompting.
In addition, after typing any given command plus one space, users can see all of the next possible sub-commands, in
sequential order, by repeatedly pressing the Tab key.
To re-enter the previous command at the command prompt, press the up arrow cursor key. The previous command
will appear at the command prompt.
DES-3528:admin# config account
Command: config account
Next possible completions:
<username>
DES-3528:admin# config account
Command: config account
Next possible completions:
<username>
DES-3528:admin#
In the above example, the command config account was entered without the required parameter <username>, the
CLI returned the Next possible completions: <username> prompt. The up arrow cursor control key was pressed to
re-enter the previous command (config account) at the command prompt. Now the appropriate username can be
entered and the config account command re-executed.
All commands in the CLI function in this way. In addition, the syntax of the help prompts are the same as presented in
this manual − angle brackets < > indicate a numerical value or character string, braces { } indicate optional parameters
or a choice of parameters, and brackets [ ] indicate required parameters.
If a command is entered that is unrecognized by the CLI, the top-level commands will be displayed under the
Available commands: prompt.
DES-3528:admin#the
Available commands:
.. ? cable_diag cfm
clear config create debug
delete disable download enable
login logout no ping
ping6 reboot reconfig reset
save show telnet traceroute
traceroute6 upload

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English