D-Link xStack DES-3528 Series - Page 99

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
99
create fdb vlanid
Purpose
Used to create a static entry to the unicast MAC address forwarding table (database).
Syntax create fdb vlanid <vidlist> <macaddr> [port <port> | drop]
Description
This command will make an entry into the Switch’s unicast MAC address forwarding
database.
Parameters
<vlanid_list> − Specifies a range of VLANs to be configured.
<macaddr> − The MAC address that will be added to the forwarding table.
port <port> − The port number corresponding to the MAC destination address. The Switch
will always forward traffic to the specified device through this port.
drop - Specifies that all the ports specified will drop the packet of the previously configured
MAC
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command
Example usage:
To filter an unicast MAC:
DES-3528:admin# create fdb default 00-00-00-33-01-02 drop
Command: create fdb default 00-00-00-33-01-02 drop
Success.
DES-3528:admin#
create multicast_fdb
Purpose
Used to create a static entry to the multicast MAC address forwarding table (database)
Syntax create multicast_fdb <vlan_name 32> <macaddr>
Description
This command will make an entry into the Switch’s multicast MAC address forwarding
database.
Parameters
<vlan_name 32> − The name of the VLAN on which the MAC address resides.
<macaddr> − The MAC address that will be added to the forwarding table.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command
Example usage:
To create multicast MAC forwarding:
DES-3528:admin# create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
DES-3528:admin#