11
4 Operation Instruction
4.1 Password Setting
4.1.1 First Login
For security reason, please set password at first time login, as shown in Figure 4-1.
Figure 4-1
Step 1 Press [ ] or [ ] to select text box, and press numeric key to input “Password” and
“Confirm”.
In case of wrong input, press [ ], or press [ ] or [ ], select “Clear” to clear the
inputted content and input again.
Step 2 Press [ ] or [ ] to select “Save”. Then, press [OK] to enter the homepage.
4.1.2 Not First Login
After login, modify password in “System→ Password”.
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Password” and press [OK].
The interface is shown in Figure 4-2.
To Next Page
Loading...
Need help?
General