Dahua ARC5402A-GW - PGM Setting

28
Figure 4-25
Step 4 Press [ ] or [ ], press [OK] and select the zones.
 Repeat the operation to select multiple zones.
 One zone can be added to different modes.
Step 5 Press [ ] or [ ], select “Save” and press [OK] to save the settings.
4.9 PGM Setting
Set alarm output time, siren time and internal siren time.
Step 1 In the homepage, press [ ] or [ ], select “Setting” and press [OK].
Step 2 Press [ ] or [ ], select “PGM” and press [OK].
The interface is shown in Figure 4-26.
Figure 4-26
Step 3 Press [ ] or [ ]; select corresponding parameter text box.
Step 4 Press numeric keys to input time value.
Step 5 Press [ ] or [ ], select “Save” and press [OK] to save the settings.