17
Figure 4-8
Step 4 Press [ ] or [ ], select and press [OK].
Switch to and enable 2G function.
Step 5 Press [ ] or [ ], select “SMS Title” text box and press [OK].
Please refer to “Appendix 1 Operating Instructions of Input Method”, input SMS title
info, which is used to differentiate from SMS contents.
Step 6 Press [ ] or [ ], select “Contacts” text box and press [OK]. Input a receiver’s phone
number and press [OK]. Press [ ] or [ ] again, select and press [OK], to add
the phone number to the list.
Repeat above steps to input other phone numbers, as shown in Figure 4-9.
Figure 4-9
Step 7 Press [ ] or [ ], select “Save” and press [OK] to save the settings.
4.3.4 P2P
Enable P2P function, open mobile phone APP, directly input the SN or scan QR code to get SN,
To Next Page
Loading...