16
search and connect again.
Pairing function is used when the device connects WIFI network, with which
mobile phone APP is connected. When mobile phone APP inputs WIFI password
to connect, the device chooses “Pairing” to connect this WIFI network. For details,
please refer to user’s manual of mobile phone APP.
For password input operation, please refer to “Appendix 1 Operating Instructions
of Input Method”.
Figure 4-7
4.3.3 2G
Support SIM card; report alarm and failure events through SMS (short message service).
2G function shall be enabled to realize SMS alarm.
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Network” and press [OK].
Step 3 Press [ ] or [ ], select “2G” and press [OK].
The interface is shown in Figure 4-8.
To Next Page
Loading...