42
4.18.4 Arm and Disarm with Mobile Phone APP
The system supports to arm and disarm with mobile phone APP. For specific operation, please
refer to user’s manual of mobile phone APP.
4.19 Duress Password
The device supports duress password. When you enter duress password, the system will
produce duress event alarm, and report alarm info with default linkage SMS and PSTN, which
won’t produce a log.
A duress password is to add “1” to the last digit of user password. If the last digit is “9”, enter “0”
as the last digit. For example, if a user password is “123456”, so its corresponding duress
password is “123457”. If a user password is “123459”, then its corresponding duress password
is “123450”.
4.20 View Zone Alarm Info
Press [3] in the homepage, and “Zone” interface will pop up, as shown in Figure 4-46.
means that the zone is in alarm status; means that the zone is in abnormal status;
means that the zone is in offline status.
In case of zone alarm in armed status, “Zone” interface will pop up automatically, so as to view
zone info.
Figure 4-46
To Next Page
Loading...
Need help?
General