Dahua ARC5402A-GW - Initialization; Reboot; Info; View Device Log

34
again.
4.15 Initialization
Reboot the device or restore factory defaults.
4.15.1 Reboot
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Initialization” and press [OK].
Step 3 Press [ ] or [ ], select “Reboot” and press [OK]. Pop up a confirmation prompt box.
Step 4 Press [ ] or [ ], select “Yes” and press [OK]. The device will be rebooted.
4.15.2 Initialization
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Initialization” and press [OK].
Step 3 Press [ ] or [ ], select “Initialization” and press [OK].
Pop up a confirmation prompt box.
Step 4 Press [ ] or [ ], select “Yes” and press [OK].
It displays “Rebooting…” The device will be rebooted and restore factory defaults.
4.16 Info
View device log and info.
4.16.1 View Device Log
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Info” and press [OK].
Step 3 Press [ ] or [ ], select “Log” and press [OK].
The interface is shown in Figure 4-34.