Dahua ARC5402A-GW - Event Reporting Setting; Time Setting

29
4.10 Event Reporting Setting
Set reporting position of alarm info in case of SOS, power off and tamper.
Step 1 In the homepage, press [ ] or [ ], select “Setting” and press [OK].
Step 2 Press [ ] or [ ], select “Other” and press [OK].
The interface is shown in Figure 4-27.
Figure 4-27
Step 3 Press [ ] or [ ], select corresponding check box and press [OK] to select or cancel.
Step 4 Press [ ] or [ ], select “Save” and press [OK] to save the settings.
4.11 Time Setting
Set device time, time format and DST.
4.11.1 Time Setting
Step 1 In the homepage, press [ ] or [ ], select “System” and press [OK].
Step 2 Press [ ] or [ ], select “Time” and press [OK].
Step 3 Press [ ] or [ ], select “Time Setting” and press [OK].
The interface is shown in Figure 4-28.