Dahua ARC5402A-GW - Arm and Disarm with Remote Control

41
Figure 4-44
4.18.2.2 Disarm
In armed status, swipe a card at card-swiping area. The system beeps twice, and LCD shows
“Disarm” at the top. Remove the last arm, and all zones enter disarmed status.
4.18.3 Arm and Disarm with Remote Control
The system supports to arm and disarm with remote control, so you can perform stay arm,
away arm, disarm and SOS remotely.
Before arming, make sure that all designated zones are in corresponding armed mode.
Figure 4-45