3 Set-up and installation
Installation and operating manual
11
Daikin Altherma EHS(X/H)(B)-D
Daikin Altherma 3 R ECH₂O
008.1451099_00 – 07/2020
3 Set-up and installation
WARNING
Cooling systems (heating pumps), climate control systems
and heating devices that have been set up and installed
incorrectly can both endanger human life and health and
be impaired in their function.
▪ Work on the indoor unit (such as set-up, repair,
connection and initial commissioning, for example)
must only be carried out by persons who are
authorised, who have successfully completed qualifying
technical or vocational training for the respective
activity and who have taken part in advanced training
sessions recognised by the relevant responsible
authority. These include, in particular, certified heating
engineers, qualified electricians and HVAC specialists
who, because of their professional training and expert
knowledge, have experience in the professional
installation and maintenance of heating, cooling and air
conditioning systems and heat pumps.
Incorrect set-up and installation would render the manufacturer's
guarantee for the unit void. If you have questions, please contact our
Technical Customer Service.
3.1 Dimensions and connection
dimensions
Dimensions …04P30D.../…08P30D...
3‒1 Dimensions …04P30D.../…08P30D...
a Solar flow
b Domestic cold water
c Hot water
d Heating flow
e Heating return flow
f Connection for refrigerant gas line
g Connection for refrigerant fluid line
h Biv flow (…Biv type only)
i Biv return flow (…Biv type only)
A front
B rear
To Next Page
Loading...
